Features
The surface grinding-milling machine, model MG-1400 is a medium size wet grinding machine which with its sturdy and well proportioned design offers a lot of advantages within small and medium size engine reconditioning as well as industrial grinding.The fact that the stability of the machine is constant regardless of the height of the item to be ground assures optimum stock removal and grinding result.
·Spindle motor and traverse motor are inverter motor ( stepless speed) with easy operation and anti-vibration(resonance can be avoided);
·Motor with low vibration level;
·Feeding screw and traverse screw are ball types, with low damping, stable and durable;
·The slider guideway is designed with plastic-coated guide rails, providing good vibration absorption, strong wear resistance and high precision;
·Spindle sleeve is chrome plated and ground, with a bright and rust-proof surface;
·Integrated electric control modules, no - spark contacts, with safe and reliability;
·Spindle feeding is provided with braking device to avoid vibration, and permit a steady feeding;
·Separated circuits of water and electric, with safe and reliability, as well as chain sleeve for protection;
·Sheet metal with plastic coating, beautiful and durable surface;
·By using a magnetic chuck, available as extra equipment, the range of applications of the machine as an industrial grinding machine is widely extended.
-
Design
Regardless of the height of the item to be ground the machine has the same rigidity of the grinding head, always givingyou the best and fastest grinding result.
Regardless of the height of the item to be ground the grinding process always takes place below eye height and easily in sight and reach of the operator.
The MG-1400 design makes the machine take up 30-35% less space than other surface grinding machines with the same capacity.
-
Main specifications
|
Model
|
MG1400
|
|
Grinding wheel motor
|
4 Kw , frequency conversion control
|
|
50 Hz ---- 960 rpm
|
|
20~70Hz --- 400~1340 rpm
|
|
Grinding wheel traverse
|
0.75 Kw
|
|
Coolant pump motor
|
0.4 Kw
|
|
Capacity of coolant tank
|
140 L
|
|
Max. grinding length
|
1400 mm
|
|
Max. grinding width
|
400 mm
|
|
Max. height of work piece
|
850 mm
|
|
Working table size
|
1400×600 mm
|
|
Grinding wheel size
|
Φ410 mm
|
|
Number of segments
|
12 pcs
|
|
Vertical movement of wheelhead
|
150 mm
|
|
Feed of wheelhead per graduation
|
0.01 mm
|
|
Wheelhead traverse speeds
|
0~2000 mm/min
|
|
Overall dimensions(L×W×H)
|
2800mm×1200mm×2450 mm
|
|
Packing dimensions(L×W×H)
|
2850mm×1300mm×2200 mm
|
|
N.W./G.W.
|
3500/4000 kg
|
-
Standard Accessories : 1. setting-up blocks: 1050mm×120mm
2. setting-up blocks: 600mm×130mm
3. setting-up blocks: 600mm×160mm
4. setting-up blocks: 600mm×200mm
5. wheel balance stand and arbor
Optional Accessories:
6. V-block setting-up fixtureThe top face grinding of V-engine blocks with 60°-90° or any other inclination is very conveniently performed with this special setting-up fixture consisting of two pedestals, three bars and a clamping device.
|
